![]() Then, pull the seat, spring and the second seat, notice their direction. In order to release it, you should use your finger / a flat screwdriver and hold the pin from behind, then, use a pliers to push the upper seat down and turn it 1/4 turn. On each show you can see a pin and spring that holds it in centered in place. ![]() Remove the spring and put it and the starwheel (adjuster) in a safe place. The lower spring and the adjuster, notice its direction. In order to remove the parking brake shoes, you have to pull those spring out, then remove the little plate. Upper view of the Pajero parking brake: notice the springs and plate. Now, you will see the parking brakes mechanism, Pay attention to each and every part as you will have to put it back in the exact same order… Use a 8mm bolt to remove the brake disc, carefully screw it into the holes and see the magic □ Remove the caliper – DO NOT disconnect the brake hose, just put the caliper on a safe place – you may want to tie it in order to secure it. Now, we have to remove the caliper, it is being hold in place by 2 bolts: ![]() Release the parking brake and shift the gear to “N”. Secure the front wheels, put some blocks in front and after them so the car won’t move.Raise the Pajero, use a jackstand, never work without it.We are not recommending to do that job by yourself and we are not responsible to any injury or harm that will be caused due to that. If you haven’t done it by yourself yet, you may want to use the help of someone who did. We are dealing with the brakes system here.
0 Comments
Leave a Reply. |